ciscostaticroutecommand

2011年4月20日 — Static routes support Virtual Routing and Forwarding instances (VRFs). By default, Cisco NX-OS places you in the default VRF unless you ...

This document describes static routes and uses a problem scenario to demonstrate when it is desirable to specify how to reach the next hop IP address.

Use the no keyword with this command to remove the static route. Displays routes from the Unicast Route. Information Base (URIB). (Optional) show ip route.

This is something people often forget configuring static route for the first time. Specify the static route: Router(config)#ip route 192.168.1.0 255.255.255.0 ...

以下我們試加一條Static Route。 R1#configure terminal Enter configuration commands, one per line. End with CNTL/Z. R1(config)#ip route 192.168.1.0 255.255 ...

The IP route command includes the destination network followed by a mask and so you can insert CIDRE or Classless Inter-Domain Routing Entries pointing to ...

Use the show ip route command to view the routing table. This is what a router uses to make decisions about where to forward IP packets to. By default, a ...

This module describes the commands used to establish static routes. For detailed information about static routing concepts, configuration tasks, ...

2023年7月10日 — This is the floating static route to the LAN. 以下是R2 上的組態： hostname R2 ! interface Serial1/0 ip address 10.10.10.2 255.255.255.252